Guitar Jam Daily
Home Columnists Columnists FX Pedalboard Tips and Tricks
October 20, 2017
FX Pedalboard Tips and Tricks PDF Print E-mail
Friday, 05 December 2008 04:22
By Benjamin Fargen - GJD Contributor
Back in the 1960’s through the early 70’s guitar players were lucky to have one maybe two pedals on the floor at a gig unless they were a superstar…maybe a Fuzz pedal or the lowly MXR micro boost would make an appearance…other than that it was the guitar, the cord and the amp…

Well things have certainly changed in the modern age…whether you’re catching a show at Wembley arena or a gig at your local hole in the wall blues bar, you won’t ever look at the floor in front of the guitar player and see blank space. You will most likely see a glowing array of LED’s piercing the darkness…what you’re seeing is not a UFO…it is in fact an FX pedalboard loaded to the gills with the latest and greatest pedals…pedals that are gracing the guitar players pedal board… this week. But you know and I know, that pedalboard won’t look the same next week…we just can’t leave it alone! That being said I have built quite a few pedal boards in my day and made many discoveries and many mistakes…here are some tips to help you set up a lean and mean guitar FX pedalboard for your needs.

1.    Do all you’re serious A/B testing up front and break it down to the essential pedals before you even start thinking about the layout and board size. There is nothing worse than getting your new board together and then deciding after you’re done you want to swap that Fuzz for an OD or that Chorus pedal for a Flanger! Then Murphy’s Law will prevail and the new the pedal won’t fit or the jacks are on the wrong side etc. Do yourself a favor and make a true commitment to the pedals you want to use before you start your pedal board project.

2.    Once you have decided on your stable of must have pedals…grab yourself a large piece of cardboard or large sized grid paper and do a mock layout of your board to obtain the correct size…don’t forget to factor in your power strip or power supply as these items usually eat up some space at the top of your board and must be considered. Don’t skip this step. It’s critical for choosing the proper layout and proper size board. After you have created a solid and functional layout for all your pedals on your cardboard or grid paper… you can now mark out your mounting points for each pedal (I’ll go into mounting options in a bit.) Make sure you leave enough room between the pedals for all you audio cables, DC power supply cables and the actual mounting method you will be using for mounting your pedals to the deck.

3.    At this point it’s also a good idea to mock up all the cable runs that you will be using on your new board. I like to layout all the power supply cables that will be running to each pedal followed by my audio cables. I personally use George L’s cable for all my inter-pedalboard connections as it’s just so easy to size and route where you need it to go.

4.    Once you feel comfortable with the overall pedal layout and cable runs, it should be easy to determine the overall size your pedalboard needs to be. You can choose to buy one on line from a million different venders on E-bay or the like. You can also go the home grown route and get yourself a nice piece of 3/8-1/2 birch ply wood cut to size and wrap it in Ozite (speaker covering material). Screw in some rubber feet on the bottom (double them up on the top side of the board for a nice elevated angle); add a handle or two and bam! You’re in business.

5.    Now that you have acquired that fancy new pedalboard or built your own deck, it’s time to break out your layout and emulate it on the actual pedal board and mount all your pedals.

6.    Ahh…mounting the pedals you say…what do you think is the best method Ben? Well…I have worked through all of different mounting concepts for pedals on a pedalboard…Velcro, Industrial Velcro, Zip Ties, Silicon, you name…and I finally have found what I think to be the ultimate mounting solution for pedal…individually sized metal links from a bike chain or motorcycle chain. These individual links mount through the bottom access plate holes on each pedal with the stock machine screws. You can then use wood screws to mount your pedals to the deck through the other side of the link.  My two current touring boards have survived multiple plane flights and UPS shipping without a single pedal coming loose or moving around.

7.    Once your pedals have been securely mounted to the deck, go ahead and run all your power supply cables to each of the pedals. To make you wire runs stay in place and look professional, fasten each of the wires every 6 inches or so with a small plastic wire clamp and fasten it to the deck. Next run all your audio cables to each of your pedals and fasten these wires to the deck the same way.

8.    At this point you should be able to fire up your new FX pedalboard and burn off some of your favorite licks!
 
Just a few side notes:
1.If you have any pedals that are super close together on your board, make sure you have enough room to plug in your audio cables after they are mounted to the deck; otherwise you will need to connect your cables to these pedals prior to mounting them to the deck.

2. When you’re building any new cables for your pedalboard…take a few minutes and test the continuity of each of the cables. This endures they are working properly before you commit them to your new board, nothing worse than firing up your new pedal board for the first time and hearing nothing but golden silence due to a bad or shorted cable.

3.If you’re new to FX pedals or are trying a new setup…do some research on the best routing method and FX order for your style…a generic and standard order to follow would be TUNER / FILTERS (AUTO WAH / WAH) / COMPRESSOR / OVERDRIVES / MODULATION (CHORUS/ FLANGE /TREM) /VOLUME PEDAL / REVERBS & DELAYS.

Happy Jamming!

Benjamin Fargen

 
ADVERTISEMENT

Daily Video Lesson

Daily Video Lesson
  • 02:41 - 01.10.2008 Spotlight >> Spotlight
    A five week long, cross-country tour featuring some of the best known and most respected figures in rock and blues has been set to celebrate the legacy and music of Jimi Hendrix. Presented by Experience Hendrix, L.L.C., the Hendrix family-owned company founded by James A. “Al” Hendrix, Jimi’s father, entrusted with preserving and protecting the legacy of Jimi Hendrix together with musical instrument giant Gibson Guitar, this year’s Experience Hendrix Tour represents a dramatic expansion beyond last year’s seven sold out performances.

    Featured artists who will be performing music written by and associated with Jimi Hendrix include blues giant Buddy Guy, contemporary guitar greats Jonny Lang, Kenny Wayne Shepherd and Eric Johnson, Cesar Rojas and David Hidalgo of Los Lobos as well as Aerosmith’s Brad Whitford.
    Read more...
  • 01:53 - 26.09.2008 Spotlight >> Spotlight
    Fender Musical Instruments Corporation (FMIC) and Italian distributor M.Casale Bauer proudly announce the grand opening of the Fender Custom Shop Showcase Italy. It is the third such international exclusive Fender guitar destination, joining the elite Fender Custom Shop Lounge (Düsseldorf, Germany) and Fender Showcase Tokyo (Japan).

    The Fender Custom Shop Showcase Italy is in Bologna, Italy, and is housed in a building by California-born Italian designer Gretchen Alexander. The showroom is located near the offices of M. Casale Bauer, Fender’s Italian distributor since 1962, and was created to provide Fender dealers, their special guests and artists with a comfortable place to find, try and buy some of the most beautiful guitars in today’s market. The showcase features an impressive array of high-end guitars crafted by the master builders of the Fender Custom Shop and provides artists and dealers (and their VIP clients) with access to some of the most unique high-end Fender instruments ever made available in one place. The showroom houses an unparalleled selection of Fender Custom Shop instruments, as well as Bauer’s personal collection, one of the largest and most valuable in the world.
    Read more...
  • 03:41 - 23.09.2008 Spotlight >> Spotlight
    Los Angeles, CA – World-renowned Australian guitarist Tommy Emmanuel will  release Center Stage, a live concert DVD on October 14th via Favored Nations Acoustic.  
     
    The full-length concert DVD follows the recent release of the Center Stage  double CD, both having been recorded live for the PBS television series “Sierra Center Stage.” Filmed in eye-catching high definition, every element of modern technology was used in production, creating a stunning package, both aurally
    and visually. 
    Read more...
  • 00:09 - 19.09.2008 Spotlight >> Spotlight
    Montreal, Canada- September 16th, 2008: Renowned guitarist Daryl Stuermer will be giving Godin Performance Clinics in and around Quebec and Eastern Ontario from September 29th to October 3rd 2008.

    Having performed in studio and toured the world with both Phil Collins and supergroup Genesis for years, Daryl is a player who is on top of his game and has the chops to prove it. Performing as the Daryl Stuermer Duo, he will be accompanied by keyboardist Konstantin Efimov during the clinics and will also be giving attendees his perspective on playing live, recording, technique, and his gear, by fielding a Q&A session after each performance.
    Read more...
  • 09:29 - 03.06.2008 Spotlight >> Spotlight
    SCOTTSDALE, Ariz. (June 2, 2008) -- Fender Musical Instruments Corporation (FMIC) announced today that it has acquired certain assets of Groove Tubes LLC. Among other assets, FMIC purchased the Groove Tubes brand. Groove Tubes company founder Aspen Pittman will continue in a consulting role.
    Read more...